Hunkyjunk Fit Bulge Padded Cock Ring, A Soft Seat for Your Package

“Press that thick base between your fingers. That’s a generous bit of squish.”

The Padding Is All Down Below

Put the Fit Bulge cock ring on its side and you can see where the shape fills out. The padded lower edge is approximately 39mm deep. It sits under the scrotum and lifts your package up and forward for a fuller profile.

Give the base a squeeze and it yields in your hand. Hunkyjunk uses a velvet-soft Plus+SILICONE blend, with a shallower upper edge and a thicker cushion underneath. That’s the part you’ll want to feel when you’re choosing a padded ring.

Hunkyjunk Fit Bulge Padded Cock Ring Key Features

✅ 39mm of lower padding: The deep, yielding base is the cushion that sits underneath your package.

✅ Up-and-forward lift: The hung-style base is shaped to support from below and give you a fuller profile from the side.

✅ Shallower 16mm top: The upper edge has less depth, keeping most of the padding where you want the lift.

✅ Velvet-soft Plus+SILICONE blend: The rubbery material gives under your fingers and flexes as you fit it.

✅ 34mm unstretched inner diameter: Use the resting opening to compare Fit Bulge with a fixed loop you already wear comfortably.

✅ One moulded padded ring: The soft cushion is built into the ring and gives it its shape without any controls or power.

Feel How the Padding Builds Toward the Base

Run a finger from the shallower top down the side and you’ll reach the deepest part of the ring. The opening stays rounded, with a soft slope into the base. That extra depth puts more material beneath the scrotum, where it supports the lift.

The ring flexes as you fit it. Once it’s comfortable, the broad cushion is the detail you can feel and see when you turn it sideways.

Experience Level

Choose Fit Bulge if you’re already comfortable with a stretch-on cock ring and have room for a thicker base. Check the opening and make sure you can take it off easily before play.

Let the Padding Show From the Side

This is one to try when a fuller profile is what you’re after. Settle the padded base underneath, then see how it looks from the side in fitted gear or a favourite pair of undies. Give yourself a moment to enjoy that extra shape.

For When You Want the Cushion to Show

If you like the idea of a ring with real depth underneath, Fit Bulge gives you more to work with than a slim band. The base yields when you squeeze it, so the fuller outline comes with a soft place for your package to sit.

For a fit comparison, use the approximately 34mm unstretched opening. The 39mm is the depth of the bottom cushion, which is the figure to look at if you plan to wear it under close-fitting gear.

Product Information & Measurements

ℹ️ Brand: Hunkyjunk

ℹ️ Model: Fit Bulge Hung Style

ℹ️ Material: Plus+SILICONE blend

ℹ️ Colour: Black

ℹ️ Overall width: Approximately 64mm

ℹ️ Overall height: Approximately 64mm

ℹ️ Top depth: Approximately 16mm

ℹ️ Bottom padding depth: Approximately 39mm

ℹ️ Unstretched inner diameter: Approximately 34mm

What’s Included

ℹ️ 1 x Hunkyjunk Fit Bulge padded cock ring

Care & Use

Clean the ring with warm water and mild soap or a compatible toy cleaner. Rinse around the padded edge, air-dry and store separately.

Keep the fit comfortable and easy to remove. Take it off straight away if you feel pain, lose feeling or notice swelling or a change in skin colour. Seek urgent medical care if you can’t remove it.

Tip: Use a little water-based lubricant on the inside of the opening to ease fitting and removal.

Shop With Confidence

Fit Bulge is for the nights when you want that deep cushion to do the lifting. The softer material gives under your fingers while the extra depth sits right underneath.

We’ve been helping Aussies find their kind of fun for over 25 years. Come as you are, pick a fit that feels right and have a look at what that padding does from the side.